Radiator Valves - Straight, Angled or Corner?
So where do you begin when it pertains to choosing valves for your radiators?
1. Are your pipes already installed?
This means you have freedom when it comes to choosing your radiator and valves. You may be able to have this moved but, if not, this might narrow down your radiator and valve options.
2. "Wall-mounted" or "floor-mounted"?
A question we are typically asked is whether a certain type of radiator can be "wall-mounted" or "floor-mounted".
"Wall-mounted" suggests that the radiator is hung from the wall on brackets (without feet). There is a typical misunderstanding amongst house owners that "wall-mounted" implies that the pipes come out of the wall.
"Floor-mounted" implies that the radiators are remained on the floor, usually on "feet". Once again however clients typically believe that this indicates that the pipes originate from the floor.
Whether the radiator is hung from a wall or remained on feet, the pipes can come from wherever you require them to; from the wall, from the floor, along the skirting board, and so on. This position of your pipes does not impact your option of radiator; however it does impact your choice of valve.
3. Position of valve connections?
In order to pick the best valves, you to start with have to know if your radiator has "side connections" or "underside connections".
The connections for the valves (holes) are situated at the bottom of the radiator on either side. This is the norm for conventional corrugated panel radiators and conventional style cast iron radiators. This type of connection is also known as BBOE or Bottom Opposite Ends.
The connections for the valves (holes) are positioned below the radiator, at either end or centrally at 50mm apart. This is the norm for ladder style towel radiators and is common on many modern vertical radiators, which are designed to take up a minimum quantity of wall space.
4. Position of pipes?
Choose your particular set-up from the list listed below:
Pipes turning up from the floor on a radiator with side connections = you searching for "tilted" valves The head of the valves would sit upright, either side of the radiator.
Pipes showing up from the floor on a radiator with underside connections = you need "straight" valves The valves would sit beneath the radiator and the head of the valves can be twisted so they are in-line with the bottom of the radiator and do not protrude into the room.
Pipes coming out of the wall on a radiator with side connections = you can select from "angled" or "corner" valves Traditionally installers would use angled valves, however this implies that the valves would lie flat either side of the radiator and the valve heads would stick forward into the space normally beyond the front of the radiator. A neater option is to use corner valves, which means that the valves would be either side of the radiator however the heads of the valves would sit upright, instead of extending into the room.
Pipes coming out of the wall on a radiator with underside connections = you can choose from "angled" or "corner" valves Traditionally installers would use angled valves, but this implies that the valves would sit beneath the radiator and the valve heads would stick forward into the room typically beyond the front of the radiator. A neater option is to use corner valves, which means that the valves would sit below the radiator and the heads of the valves would sit horizontally, instead of extending into the space.For finding ideal position of pipes visit ecigaretteweb.
5. Manual or thermostatic?
Keep in mind, you also have to choose whether you require thermostatic or manual valves.
Focusing on exceptional items, top-level customer support and the development of the Feature Radiators' brand, Helena's work has actually guaranteed that this award winning company continues to go from strength to stamina.
Function Radiators are commonly regarded as one of the UK's leading radiator sellers and self-confessed "radiator geek", Helena is there to help make sure the company stays securely on track.